Fence permit rules by county
Height cutoffs, masonry walls, and the split between a building permit and a zoning permit. Cities are in the list too. A city rule is not the county rule, even when the city sits inside that county. Open a row for the quote and the link.
Arizona
- City of PhoenixIt depends
For a house, duplex, or townhouse, a fence not over 3 feet does not need a permit. Between that and 6 feet, you still pull a building permit, and Phoenix says that permit is there to check zoning and site drainage. Over 6 feet, the permit has to show the building code, not just zoning. The city's plainer residential page matches the first cut: fences taller than 3 feet are on the permit list.
California
- City of BerkeleyIt depends
A fence under 7 feet does not need a building permit. A fence over 6 feet needs a zoning permit. Between 6 and 7 feet you can skip the building permit and still have zoning to deal with. At 7 feet, you are off the building-permit exemption, and the city says to assume you need a permit if the work is not on the list.
Florida
- Marion CountyNot published
Marion County has not published a fence height that skips a permit. Building Safety says it enforces the Florida Building Code, 8th edition, and related county ordinances, and it prints a phone number. The 6-foot line you may have seen is the City of Ocala's rule, for property inside the city. A higher number repeated on fence blogs is not on the county permit page.
- Miami-Dade CountyIt depends
A chain-link or picket fence, the county's examples of a non-wind-resistant fence, does not need a building permit and does need a zoning permit. A wind-resistant fence needs a permit even if the job is under $7,500. Chain-link that is not a pool barrier also shows up on an older list that only holds if the listed work stays at or under $5,000 in a 12-month period. There is no height cutoff on the page.
- City of OcalaIt depends
On a house in the city, a fence 6 feet or lower does not need a building permit. It does need one if the lot is in a historic district, if the fence is taller than 6 feet, or if it is a wall, meaning masonry or concrete. Every commercial fence needs a site permit, at any height. The city did not print a setback number on this page. Planning handles that, at 352-629-4040.
- Orange CountyYes
Yes. A fence needs a permit in unincorporated Orange County. At 6 feet or under, Zoning issues it. Over 6 feet, or if it is masonry, it is a building permit. The county does not describe a height where you can skip both.
- City of TampaNot published
Tampa prints its no-permit list as city code section 5-105.2. Fences are not on it, and the FAQ does not give a height where a fence would be exempt. Painting, floor covering, and a small shed are on the list. A fence is not. Call Construction Services at (813) 274-3100 rather than filling the blank from a blog.
Nevada
- City of Las VegasIt depends
An ornamental iron or wood fence over 7 feet needs a permit. A block wall over 30 inches needs one too. The no-permit line for iron or wood not over 7 feet has an except clause: fences in the front setback of a single-family house, and, in the city's words, fences that are not part of a pool or spa barrier. That second phrase is clumsy. Read it yourself on the guide, and call 702-229-6251 before you treat a pool fence as exempt. The guide does not print how deep the front setback is.